| Product
|
Comments
|
Applications/Properties
|
| EvCote
P18NS-28 |
Nonionic,
hydrophilic dispersion |
Base
coat for ink jet paper; product should be formulated for
optimum performance |
| EvCote
P23 Series |
Anionic
, hyrdrophilic dispersion |
Adhesion
promoter for polyester-based substrates; excellent sizing
properties with starch |
| EvCote
P35-50 |
Sulphonated
dispersion; very hydrophilic |
Lowers
congealing temperature of pearl starch; provides oil repellency,
but is soluble in water |
| EvCote
P44NS-20 |
Nonionic,
hydrophilic dispersion |
Base
coat for ink jet paper; product should be formulated for
optimum performance |
| EvCote
P56 Series |
Anionic,
slightly hydrophobic copolymer |
Imparts
strength and stiffness to the sheet; if coated, gives high
gloss; binder for toner used in various printing applications |
| EvCote
PBC-55 Series |
Neutral
formulated product |
Used
as a base coat; specially formulated to be compatible with
EvCo barrier coatings and other polymers |
| EvCote
PCT-60 |
Alkali-swellable
acrylic thickener |
Compatible
with formulated EvCo products; use to increase the viscosity
of the formulated products |
| EvCote
PGLR Series |
Linear,
nonionic copolymer dispersion |
Used
as a barrier coat where improved glueability, printability
and flexibility are required, as compared to PWR; typical
applications are bags, folding carton, flexible packaging |
| EvCote
PGLRF-40 |
Formulated
version of PGLR to give additional flexibility to the cured
film |
Use
as a replacement for PGLR where a lower Tg film (greater
flexibility) is required |
| EvCote
PHB-38 |
Formulated
version of PGLR to give lower MVTR properties under tropical
conditions |
Use
in applications where barrier properties are required when
exposed to tropical conditions |
| EvCote
PLC Series |
Hydrophilic,
aryl sulphonated polyester copolymer |
Gives
high dry pick properties; prevents flocculation of clay
during coating process |
| EvCote
PR Series |
Glyoxal-based,
formaldehyde free promoter |
Insolubilizer/enhancer
for barrier coatings (e.g., PWR), especially where improved
oil resistance is required |
| EvCote
PSS-25 |
Sulphonated
copolymer that will self-crosslink upon exposure to air |
Water
resistant coating; strength enhancement; surface size |
| EvCote
PSX-25 |
Anionic,
hydrophobic copolymer that will self-crosslink upon exposure
to air |
Strength
enhancement; surface size; ink rub resistance |
| EvCote
PWR Series |
Anionic,
very hydrophobic copolymer |
The
most water repellent barrier coating; can be used in most
barrier applications, replacing wax coated boxes; applications
include poultry, meat, fruits, vegetables and flower shipping
containers |
| EvCote
PWRH Series |
Anionic,
very hydrophobic copolymer |
Same
applications as PWR; use where added gloss is an advantage |
| EvCote
PWRHF-40 |
Formulated
version of PWRH to give additional flexibility to the cured
film |
Used
in flexible applications such as butter wrap, sandwich wrap,
pizza boxes, fast food containers, popcorn bags |
| EvCote
PWRHS-37 |
Formulated
version of PWRH to give heat-sealability to a cast film |
Heat-sealable
coating used for roll wrap, header stock, laminated films |
| EvCote
PWRSAC-35 |
Formulated
version of PWRH to increase the slide angle of a cast film |
Flexible
packaging applications where barrier properties are required,
but the slide angle of PWR is too low |
